Explaining and Harnessing Adversarial Examples

2014·arXiv

ABSTRACT

1 INTRODUCTION

Szegedy et al. (2014b) made an intriguing discovery: several machine learning models, including state-of-the-art neural networks, are vulnerable to adversarial examples. That is, these machine learning models misclassify examples that are only slightly different from correctly classified examples drawn from the data distribution. In many cases, a wide variety of models with different architectures trained on different subsets of the training data misclassify the same adversarial example. This suggests that adversarial examples expose fundamental blind spots in our training algorithms.

The cause of these adversarial examples was a mystery, and speculative explanations have suggested it is due to extreme nonlinearity of deep neural networks, perhaps combined with insufficient model averaging and insufficient regularization of the purely supervised learning problem. We show that these speculative hypotheses are unnecessary. Linear behavior in high-dimensional spaces is suf-ficient to cause adversarial examples. This view enables us to design a fast method of generating adversarial examples that makes adversarial training practical. We show that adversarial training can provide an additional regularization benefit beyond that provided by using dropout (Srivastava et al., 2014) alone. Generic regularization strategies such as dropout, pretraining, and model averaging do not confer a significant reduction in a model’s vulnerability to adversarial examples, but changing to nonlinear model families such as RBF networks can do so.

Our explanation suggests a fundamental tension between designing models that are easy to train due to their linearity and designing models that use nonlinear effects to resist adversarial perturbation. In the long run, it may be possible to escape this tradeoff by designing more powerful optimization methods that can succesfully train more nonlinear models.

2 RELATED WORK

Szegedy et al. (2014b) demonstrated a variety of intriguing properties of neural networks and related models. Those most relevant to this paper include:

• Box-constrained L-BFGS can reliably find adversarial examples.

• On some datasets, such as ImageNet (Deng et al., 2009), the adversarial examples were so close to the original examples that the differences were indistinguishable to the human eye.

• The same adversarial example is often misclassified by a variety of classifiers with different architectures or trained on different subsets of the training data.

• Shallow softmax regression models are also vulnerable to adversarial examples.

• Training on adversarial examples can regularize the model—however, this was not practical at the time due to the need for expensive constrained optimization in the inner loop.

These results suggest that classifiers based on modern machine learning techniques, even those that obtain excellent performance on the test set, are not learning the true underlying concepts that determine the correct output label. Instead, these algorithms have built a Potemkin village that works well on naturally occuring data, but is exposed as a fake when one visits points in space that do not have high probability in the data distribution. This is particularly disappointing because a popular approach in computer vision is to use convolutional network features as a space where Euclidean distance approximates perceptual distance. This resemblance is clearly flawed if images that have an immeasurably small perceptual distance correspond to completely different classes in the network’s representation.

These results have often been interpreted as being a flaw in deep networks in particular, even though linear classifiers have the same problem. We regard the knowledge of this flaw as an opportunity to fix it. Indeed, Gu & Rigazio (2014) and Chalupka et al. (2014) have already begun the first steps toward designing models that resist adversarial perturbation, though no model has yet succesfully done so while maintaining state of the art accuracy on clean inputs.

3 THE LINEAR EXPLANATION OF ADVERSARIAL EXAMPLES

We start with explaining the existence of adversarial examples for linear models.

In many problems, the precision of an individual input feature is limited. For example, digital images often use only 8 bits per pixel so they discard all information below 1/255 of the dynamic range. Because the precision of the features is limited, it is not rational for the classifier to respond differently to an input x than to an adversarial input if every element of the perturbation is smaller than the precision of the features. Formally, for problems with well-separated classes, we expect the classifier to assign the same class to x and so long as , where is small enough to be discarded by the sensor or data storage apparatus associated with our problem.

Consider the dot product between a weight vector w and an adversarial example :

The adversarial perturbation causes the activation to grow by .We can maximize this increase subject to the max norm constraint on by assigning sign(w). If w has n dimensions and the average magnitude of an element of the weight vector is m, then the activation will grow by . Since does not grow with the dimensionality of the problem but the change in activation caused by perturbation by can grow linearly with n, then for high dimensional problems, we can make many infinitesimal changes to the input that add up to one large change to the output. We can think of this as a sort of “accidental steganography,” where a linear model is forced to attend exclusively to the signal that aligns most closely with its weights, even if multiple signals are present and other signals have much greater amplitude.

This explanation shows that a simple linear model can have adversarial examples if its input has suf-ficient dimensionality. Previous explanations for adversarial examples invoked hypothesized properties of neural networks, such as their supposed highly non-linear nature. Our hypothesis based on linearity is simpler, and can also explain why softmax regression is vulnerable to adversarial examples.

4 LINEAR PERTURBATION OF NON-LINEAR MODELS

The linear view of adversarial examples suggests a fast way of generating them. We hypothesize that neural networks are too linear to resist linear adversarial perturbation. LSTMs (Hochreiter & Schmidhuber, 1997), ReLUs (Jarrett et al., 2009; Glorot et al., 2011), and maxout networks (Good- fellow et al., 2013c) are all intentionally designed to behave in very linear ways, so that they are easier to optimize. More nonlinear models such as sigmoid networks are carefully tuned to spend most of their time in the non-saturating, more linear regime for the same reason. This linear behavior suggests that cheap, analytical perturbations of a linear model should also damage neural networks.

Figure 1: A demonstration of fast adversarial example generation applied to GoogLeNet (Szegedy et al., 2014a) on ImageNet. By adding an imperceptibly small vector whose elements are equal to the sign of the elements of the gradient of the cost function with respect to the input, we can change GoogLeNet’s classification of the image. Here our of .007 corresponds to the magnitude of the smallest bit of an 8 bit image encoding after GoogLeNet’s conversion to real numbers.

Let be the parameters of a model, x the input to the model, y the targets associated with x (for machine learning tasks that have targets) and be the cost used to train the neural network. We can linearize the cost function around the current value of , obtaining an optimal max-norm constrained pertubation of

We refer to this as the “fast gradient sign method” of generating adversarial examples. Note that the required gradient can be computed efficiently using backpropagation.

We find that this method reliably causes a wide variety of models to misclassify their input. See Fig. 1 for a demonstration on ImageNet. We find that using , we cause a shallow softmax classifier to have an error rate of 99.9% with an average confidence of 79.3% on the MNIST (?) test set1. In the same setting, a maxout network misclassifies 89.4% of our adversarial examples with an average confidence of 97.6%. Similarly, using , we obtain an error rate of 87.15% and an average probability of 96.6% assigned to the incorrect labels when using a convolutional maxout network on a preprocessed version of the CIFAR-10 (Krizhevsky & Hinton, 2009) test set2. Other simple methods of generating adversarial examples are possible. For example, we also found that rotating x by a small angle in the direction of the gradient reliably produces adversarial examples.

The fact that these simple, cheap algorithms are able to generate misclassified examples serves as evidence in favor of our interpretation of adversarial examples as a result of linearity. The algorithms are also useful as a way of speeding up adversarial training or even just analysis of trained networks.

5 ADVERSARIAL TRAINING OF LINEAR MODELS VERSUS WEIGHT DECAY

Perhaps the simplest possible model we can consider is logistic regression. In this case, the fast gradient sign method is exact. We can use this case to gain some intuition for how adversarial examples are generated in a simple setting. See Fig. 2 for instructive images.

If we train a single model to recognize labels with where is the logistic sigmoid function, then training consists of gradient descent on

where is the softplus function. We can derive a simple analytical form for training on the worst-case adversarial perturbation of x rather than x itself, based on gradient sign

Figure 2: The fast gradient sign method applied to logistic regression (where it is not an approxi- mation, but truly the most damaging adversarial example in the max norm box). a) The weights of a logistic regression model trained on MNIST. b) The sign of the weights of a logistic regression model trained on MNIST. This is the optimal perturbation. Even though the model has low capacity and is fit well, this perturbation is not readily recognizable to a human observer as having anything to do with the relationship between 3s and 7s. c) MNIST 3s and 7s. The logistic regression model has a 1.6% error rate on the 3 versus 7 discrimination task on these examples. d) Fast gradient sign adversarial examples for the logistic regression model with . The logistic regression model has an error rate of 99% on these examples.

perturbation. Note that the sign of the gradient is just sign(w), and that sign. The adversarial version of logistic regression is therefore to minimize

This is somewhat similar to regularization. However, there are some important differences. Most significantly, the penalty is subtracted off the model’s activation during training, rather than added to the training cost. This means that the penalty can eventually start to disappear if the model learns to make confident enough predictions that saturates. This is not guaranteed to happen—in the underfitting regime, adversarial training will simply worsen underfitting. We can thus view weight decay as being more “worst case” than adversarial training, because it fails to deactivate in the case of good margin.

If we move beyond logistic regression to multiclass softmax regression, weight decay becomes even more pessimistic, because it treats each of the softmax’s outputs as independently perturbable, when in fact it is usually not possible to find a single that aligns with all of the class’s weight vectors. Weight decay overestimates the damage achievable with perturbation even more in the case of a deep network with multiple hidden units. Because weight decay overestimates the amount of damage an adversary can do, it is necessary to use a smaller weight decay coefficient than the associated with the precision of our features. When training maxout networks on MNIST, we obtained good results using adversarial training with . When applying weight decay to the first layer, we found that even a coefficient of .0025 was too large, and caused the model to get stuck with over 5% error on the training set. Smaller weight decay coefficients permitted succesful training but conferred no regularization benefit.

6 ADVERSARIAL TRAINING OF DEEP NETWORKS

The criticism of deep networks as vulnerable to adversarial examples is somewhat misguided, because unlike shallow linear models, deep networks are at least able to represent functions that resist adversarial perturbation. The universal approximator theorem (Hornik et al., 1989) guarantees that a neural network with at least one hidden layer can represent any function to an arbitary degree of accuracy so long as its hidden layer is permitted to have enough units. Shallow linear models are not able to become constant near training points while also assigning different outputs to different training points.

Of course, the universal approximator theorem does not say anything about whether a training algorithm will be able to discover a function with all of the desired properties. Obviously, standard supervised training does not specify that the chosen function be resistant to adversarial examples. This must be encoded in the training procedure somehow.

Szegedy et al. (2014b) showed that by training on a mixture of adversarial and clean examples, a neural network could be regularized somewhat. Training on adversarial examples is somewhat different from other data augmentation schemes; usually, one augments the data with transformations such as translations that are expected to actually occur in the test set. This form of data augmentation instead uses inputs that are unlikely to occur naturally but that expose flaws in the ways that the model conceptualizes its decision function. At the time, this procedure was never demonstrated to improve beyond dropout on a state of the art benchmark. However, this was partially because it was difficult to experiment extensively with expensive adversarial examples based on L-BFGS.

We found that training with an adversarial objective function based on the fast gradient sign method was an effective regularizer:

In all of our experiments, we used . Other values may work better; our initial guess of this hyperparameter worked well enough that we did not feel the need to explore more. This approach means that we continually update our supply of adversarial examples, to make them resist the current version of the model. Using this approach to train a maxout network that was also regularized with dropout, we were able to reduce the error rate from 0.94% without adversarial training to 0.84% with adversarial training.

We observed that we were not reaching zero error rate on adversarial examples on the training set. We fixed this problem by making two changes. First, we made the model larger, using 1600 units per layer rather than the 240 used by the original maxout network for this problem. Without adversarial training, this causes the model to overfit slightly, and get an error rate of 1.14% on the test set. With adversarial training, we found that the validation set error leveled off over time, and made very slow progress. The original maxout result uses early stopping, and terminates learning after the validation set error rate has not decreased for 100 epochs. We found that while the validation set error was very flat, the adversarial validation set error was not. We therefore used early stopping on the adversarial validation set error. Using this criterion to choose the number of epochs to train for, we then retrained on all 60,000 examples. Five different training runs using different seeds for the random number generators used to select minibatches of training examples, initialize model weights, and generate dropout masks result in four trials that each had an error rate of 0.77% on the test set and one trial that had an error rate of 0.83%. The average of 0.782% is the best result reported on the permutation invariant version of MNIST, though statistically indistinguishable from the result obtained by fine-tuning DBMs with dropout (Srivastava et al., 2014) at 0.79%.

The model also became somewhat resistant to adversarial examples. Recall that without adversarial training, this same kind of model had an error rate of 89.4% on adversarial examples based on the fast gradient sign method. With adversarial training, the error rate fell to 17.9%. Adversarial examples are transferable between the two models but with the adversarially trained model showing greater robustness. Adversarial examples generated via the original model yield an error rate of 19.6% on the adversarially trained model, while adversarial examples generated via the new model yield an error rate of 40.9% on the original model. When the adversarially trained model does misclassify an adversarial example, its predictions are unfortunately still highly confident. The average confidence on a misclassified example was 81.4%. We also found that the weights of the learned model changed significantly, with the weights of the adversarially trained model being significantly more localized and interpretable (see Fig. 3).

The adversarial training procedure can be seen as minimizing the worst case error when the data is perturbed by an adversary. That can be interpreted as learning to play an adversarial game, or as minimizing an upper bound on the expected cost over noisy samples with noise from added to the inputs. Adversarial training can also be seen as a form of active learning, where the model is able to request labels on new points. In this case the human labeler is replaced with a heuristic labeler that copies labels from nearby points.

We could also regularize the model to be insensitive to changes in its features that are smaller than the precision simply by training on all points within the max norm box, or sampling many points within this box. This corresponds to adding noise with max norm during training. However, noise with zero mean and zero covariance is very inefficient at preventing adversarial examples. The expected dot product between any reference vector and such a noise vector is zero. This means that in many cases the noise will have essentially no effect rather than yielding a more difficult input.

Figure 3: Weight visualizations of maxout networks trained on MNIST. Each row shows the filters for a single maxout unit. Left) Naively trained model. Right) Model with adversarial training.

In fact, in many cases the noise will actualy result in a lower objective function value. We can think of adversarial training as doing hard example mining among the set of noisy inputs, in order to train more efficiently by considering only those noisy points that strongly resist classification. As control experiments, we trained training a maxout network with noise based on randomly adding to each pixel, or adding noise in to each pixel. These obtained an error rate of 86.2% with confidence 97.3% and an error rate of 90.4% with a confidence of 97.8% respectively on fast gradient sign adversarial examples.

Because the derivative of the sign function is zero or undefined everywhere, gradient descent on the adversarial objective function based on the fast gradient sign method does not allow the model to anticipate how the adversary will react to changes in the parameters. If we instead adversarial examples based on small rotations or addition of the scaled gradient, then the perturbation process is itself differentiable and the learning can take the reaction of the adversary into account. However, we did not find nearly as powerful of a regularizing result from this process, perhaps because these kinds of adversarial examples are not as difficult to solve.

One natural question is whether it is better to perturb the input or the hidden layers or both. Here the results are inconsistent. Szegedy et al. (2014b) reported that adversarial perturbations yield the best regularization when applied to the hidden layers. That result was obtained on a sigmoidal network. In our experiments with the fast gradient sign method, we find that networks with hidden units whose activations are unbounded simply respond by making their hidden unit activations very large, so it is usually better to just perturb the original input. On saturating models such as the Rust model we found that perturbation of the input performed comparably to perturbation of the hidden layers. Perturbations based on rotating the hidden layers solve the problem of unbounded activations growing to make additive perturbations smaller by comparison. We were able to succesfully train maxout networks with rotational perturbations of the hidden layers. However, this did not yield nearly as strong of a regularizing effect as additive perturbation of the input layer. Our view of adversarial training is that it is only clearly useful when the model has the capacity to learn to resist adversarial examples. This is only clearly the case when a universal approximator theorem applies. Because the last layer of a neural network, the linear-sigmoid or linear-softmax layer, is not a universal approximator of functions of the final hidden layer, this suggests that one is likely to encounter problems with underfitting when applying adversarial perturbations to the final hidden layer. We indeed found this effect. Our best results with training using perturbations of hidden layers never involved perturbations of the final hidden layer.

7 DIFFERENT KINDS OF MODEL CAPACITY

One reason that the existence of adversarial examples can seem counter-intuitive is that most of us have poor intuitions for high dimensional spaces. We live in three dimensions, so we are not used to small effects in hundreds of dimensions adding up to create a large effect. There is another way that our intuitions serve us poorly. Many people think of models with low capacity as being unable to make many different confident predictions. This is not correct. Some models with low capacity do exhibit this behavior. For example shallow RBF networks with

are only able to confidently predict that the positive class is present in the vicinity of . Elsewhere, they default to predicting the class is absent, or have low-confidence predictions.

RBF networks are naturally immune to adversarial examples, in the sense that they have low con-fidence when they are fooled. A shallow RBF network with no hidden layers gets an error rate of 55.4% on MNIST using adversarial examples generated with the fast gradient sign method and . However, its confidence on mistaken examples is only 1.2%. Its average confidence on clean test examples is 60.6%. We can’t expect a model with such low capacity to get the right answer at all points of space, but it does correctly respond by reducing its confidence considerably on points it does not “understand.”

RBF units are unfortunately not invariant to any significant transformations so they cannot generalize very well. We can view linear units and RBF units as different points on a precision-recall tradeoff curve. Linear units achieve high recall by responding to every input in a certain direction, but may have low precision due to responding too strongly in unfamiliar situations. RBF units achieve high precision by responding only to a specific point in space, but in doing so sacrifice recall. Motivated by this idea, we decided to explore a variety of models involving quadratic units, including deep RBF networks. We found this to be a difficult task—very model with sufficient quadratic inhibition to resist adversarial perturbation obtained high training set error when trained with SGD.

8 WHY DO ADVERSARIAL EXAMPLES GENERALIZE?

An intriguing aspect of adversarial examples is that an example generated for one model is often misclassified by other models, even when they have different architecures or were trained on disjoint training sets. Moreover, when these different models misclassify an adversarial example, they often agree with each other on its class. Explanations based on extreme non-linearity and over-fitting cannot readily account for this behavior—why should multiple extremely non-linear model with excess capacity consistently label out-of-distribution points in the same way? This behavior is especially surprising from the view of the hypothesis that adversarial examples finely tile space like the rational numbers among the reals, because in this view adversarial examples are common but occur only at very precise locations.

Under the linear view, adversarial examples occur in broad subspaces. The direction need only have positive dot product with the gradient of the cost function, and need only be large enough. Fig. 4 demonstrates this phenomenon. By tracing out different values of we see that adversarial examples occur in contiguous regions of the 1-D subspace defined by the fast gradient sign method, not in fine pockets. This explains why adversarial examples are abundant and why an example misclassified by one classifier has a fairly high prior probability of being misclassified by another classifier.

To explain why mutiple classifiers assign the same class to adversarial examples, we hypothesize that neural networks trained with current methodologies all resemble the linear classifier learned on the same training set. This reference classifier is able to learn approximately the same classification weights when trained on different subsets of the training set, simply because machine learning algorithms are able to generalize. The stability of the underlying classification weights in turn results in the stability of adversarial examples.

To test this hypothesis, we generated adversarial examples on a deep maxout network and classified these examples using a shallow softmax network and a shallow RBF network. On examples that were misclassified by the maxout network, the RBF network predicted the maxout network’s class assignment only 16.0% of the time, while the softmax classifier predict the maxout network’s class correctly 54.6% of the time. These numbers are largely driven by the differing error rate of the different models though. If we exclude our attention to cases where both models being compared make a mistake, then softmax regression predict’s maxout’s class 84.6% of the time, while the RBF network is able to predict maxout’s class only 54.3% of the time. For comparison, the RBF network can predict softmax regression’s class 53.6% of the time, so it does have a strong linear component to its own behavior. Our hypothesis does not explain all of the maxout network’s mistakes or all of the mistakes that generalize across models, but clearly a significant proportion of them are consistent with linear behavior being a major cause of cross-model generalization.

9 ALTERNATIVE HYPOTHESES

We now consider and refute some alternative hypotheses for the existence of adversarial examples. First, one hypothesis is that generative training could provide more constraint on the training pro-

Figure 4: By tracing out different values of , we can see that adversarial examples occur reliably for almost any sufficiently large value of provided that we move in the correct direction. Correct classifications occur only on a thin manifold where x occurs in the data. Most of consists of adversarial examples and rubbish class examples (see the appendix). This plot was made from a naively trained maxout network. Left) A plot showing the argument to the softmax layer for each of the 10 MNIST classes as we vary on a single input example. The correct class is 4. We see that the unnormalized log probabilities for each class are conspicuously piecewise linear with and that the wrong classifications are stable across a wide region of values. Moreover, the predictions become very extreme as we increase enough to move into the regime of rubbish inputs. Right) The inputs , yellow boxes indicate correctly classified inputs).

cess, or cause the model to learn what to distinguish “real” from “fake” data and be confident only on “real” data. The MP-DBM (Goodfellow et al., 2013a) provides a good model to test this hypothesis. Its inference procedure gets good classification accuracy (an 0.88% error rate) on MNIST. This inference procedure is differentiable. Other generative models either have non-differentiable inference procedures, making it harder to compute adversarial examples, or require an additional non-generative discriminator model to get good classification accuracy on MNIST. In the case of the MP-DBM, we can be sure that the generative model itself is responding to adversarial examples, rather than the non-generative classifier model on top. We find that the model is vulnerable to adversarial examples. With an of 0.25, we find an error rate of 97.5% on adversarial examples generated from the MNIST test set. It remains possible that some other form of generative training could confer resistance, but clearly the mere fact of being generative is not alone sufficient.

Another hypothesis about why adversarial examples exist is that individual models have strange quirks but averaging over many models can cause adversarial examples to wash out. To test this hypothesis, we trained an ensemble of twelve maxout networks on MNIST. Each network was trained using a different seed for the random number generator used to initialize the weights, generate dropout masks, and select minibatches of data for stochastic gradient descent. The ensemble gets an error rate of 91.1% on adversarial examples designed to perturb the entire ensemble with . If we instead use adversarial examples designed to perturb only one member of the ensemble, the error rate falls to 87.9%. Ensembling provides only limited resistance to adversarial perturbation.

10 SUMMARY AND DISCUSSION

As a summary, this paper has made the following observations:

• Adversarial examples can be explained as a property of high-dimensional dot products. They are a result of models being too linear, rather than too nonlinear.

• The generalization of adversarial examples across different models can be explained as a result of adversarial perturbations being highly aligned with the weight vectors of a model, and different models learning similar functions when trained to perform the same task.

• The direction of perturbation, rather than the specific point in space, matters most. Space is not full of pockets of adversarial examples that finely tile the reals like the rational numbers.

• Because it is the direction that matters most, adversarial perturbations generalize across different clean examples.

• We have introduced a family of fast methods for generating adversarial examples. • We have demonstrated that adversarial training can result in regularization; even further regularization than dropout.

• We have run control experiments that failed to reproduce this effect with simpler but lessefficient regularizers including weight decay and adding noise.

• Models that are easy to optimize are easy to perturb.

• Linear models lack the capacity to resist adversarial perturbation; only structures with a hidden layer (where the universal approximator theorem applies) should be trained to resist adversarial perturbation.

• RBF networks are resistant to adversarial examples. • Models trained to model the input distribution are not resistant to adversarial examples. • Ensembles are not resistant to adversarial examples.

Some further observations concerning rubbish class examples are presented in the appendix:

Gradient-based optimization is the workhorse of modern AI. Using a network that has been designed to be sufficiently linear–whether it is a ReLU or maxout network, an LSTM, or a sigmoid network that has been carefully configured not to saturate too much– we are able to fit most problems we care about, at least on the training set. The existence of adversarial examples suggests that being able to explain the training data or even being able to correctly label the test data does not imply that our models truly understand the tasks we have asked them to perform. Instead, their linear responses are overly confident at points that do not occur in the data distribution, and these confident predictions are often highly incorrect. This work has shown we can partially correct for this problem by explicitly identifying problematic points and correcting the model at each of these points. However, one may also conclude that the model families we use are intrinsically flawed. Ease of optimization has come at the cost of models that are easily misled. This motivates the development of optimization procedures that are able to train models whose behavior is more locally stable.

ACKNOWLEDGMENTS

We would like to thank Geoffrey Hinton and Ilya Sutskever for helpful discussions. We would also like to thank Jeff Dean, Greg Corrado, and Oriol Vinyals for their feedback on drafts of this article. We would like to thank the developers of Theano(Bergstra et al., 2010; Bastien et al., 2012), Pylearn2(Goodfellow et al., 2013b), and DistBelief (Dean et al., 2012).

REFERENCES

Bastien, Fr´ed´eric, Lamblin, Pascal, Pascanu, Razvan, Bergstra, James, Goodfellow, Ian J., Bergeron, Arnaud, Bouchard, Nicolas, and Bengio, Yoshua. Theano: new features and speed improvements. Deep Learning and Unsupervised Feature Learning NIPS 2012 Workshop, 2012.

Bergstra, James, Breuleux, Olivier, Bastien, Fr´ed´eric, Lamblin, Pascal, Pascanu, Razvan, Desjardins, Guil- laume, Turian, Joseph, Warde-Farley, David, and Bengio, Yoshua. Theano: a CPU and GPU math expression compiler. In Proceedings of the Python for Scientific Computing Conference (SciPy), June 2010. Oral Presentation.

Chalupka, K., Perona, P., and Eberhardt, F. Visual Causal Feature Learning. ArXiv e-prints, December 2014.

Dean, Jeffrey, Corrado, Greg S., Monga, Rajat, Chen, Kai, Devin, Matthieu, Le, Quoc V., Mao, Mark Z., Ranzato, MarcAurelio, Senior, Andrew, Tucker, Paul, Yang, Ke, and Ng, Andrew Y. Large scale distributed deep networks. In NIPS, 2012.

Deng, Jia, Dong, Wei, Socher, Richard, jia Li, Li, Li, Kai, and Fei-fei, Li. Imagenet: A large-scale hierarchical image database. In In CVPR, 2009.

Glorot, Xavier, Bordes, Antoine, and Bengio, Yoshua. Deep sparse rectifier neural networks. In JMLR W&CP: Proceedings of the Fourteenth International Conference on Artificial Intelligence and Statistics (AISTATS 2011), April 2011.

Goodfellow, Ian J., Mirza, Mehdi, Courville, Aaron, and Bengio, Yoshua. Multi-prediction deep Boltzmann machines. In Neural Information Processing Systems, December 2013a.

Goodfellow, Ian J., Warde-Farley, David, Lamblin, Pascal, Dumoulin, Vincent, Mirza, Mehdi, Pascanu, Razvan, Bergstra, James, Bastien, Fr´ed´eric, and Bengio, Yoshua. Pylearn2: a machine learning research library. arXiv preprint arXiv:1308.4214, 2013b.

Goodfellow, Ian J., Warde-Farley, David, Mirza, Mehdi, Courville, Aaron, and Bengio, Yoshua. Maxout net- works. In Dasgupta, Sanjoy and McAllester, David (eds.), International Conference on Machine Learning, pp. 1319–1327, 2013c.

Gu, Shixiang and Rigazio, Luca. Towards deep neural network architectures robust to adversarial examples. In NIPS Workshop on Deep Learning and Representation Learning, 2014.

Hochreiter, S. and Schmidhuber, J. Long short-term memory. Neural Computation, 9(8):1735–1780, 1997.

Hornik, Kurt, Stinchcombe, Maxwell, and White, Halbert. Multilayer feedforward networks are universal approximators. Neural Networks, 2:359–366, 1989.

Jarrett, Kevin, Kavukcuoglu, Koray, Ranzato, Marc’Aurelio, and LeCun, Yann. What is the best multi-stage architecture for object recognition? In Proc. International Conference on Computer Vision (ICCV’09), pp. 2146–2153. IEEE, 2009.

Krizhevsky, Alex and Hinton, Geoffrey. Learning multiple layers of features from tiny images. Technical report, University of Toronto, 2009.

Nguyen, A., Yosinski, J., and Clune, J. Deep Neural Networks are Easily Fooled: High Confidence Predictions for Unrecognizable Images. ArXiv e-prints, December 2014.

Rust, Nicole, Schwartz, Odelia, Movshon, J. Anthony, and Simoncelli, Eero. Spatiotemporal elements of macaque V1 receptive fields. Neuron, 46(6):945–956, 2005.

Srivastava, Nitish, Hinton, Geoffrey, Krizhevsky, Alex, Sutskever, Ilya, and Salakhutdinov, Ruslan. Dropout: A simple way to prevent neural networks from overfitting. The Journal of Machine Learning Research, 15 (1):1929–1958, 2014.

Szegedy, Christian, Liu, Wei, Jia, Yangqing, Sermanet, Pierre, Reed, Scott, Anguelov, Dragomir, Erhan, Du- mitru, Vanhoucke, Vincent, and Rabinovich, Andrew. Going deeper with convolutions. Technical report, arXiv preprint arXiv:1409.4842, 2014a.

Szegedy, Christian, Zaremba, Wojciech, Sutskever, Ilya, Bruna, Joan, Erhan, Dumitru, Goodfellow, Ian J., and Fergus, Rob. Intriguing properties of neural networks. ICLR, abs/1312.6199, 2014b. URL http: //arxiv.org/abs/1312.6199.

A RUBBISH CLASS EXAMPLES

A concept related to adversarial examples is the concept of examples drawn from a “rubbish class.” These

examples are degenerate inputs that a human would classify as not belonging to any of the categories in the

training set. If we call these classes in the training set “the positive classes,” then we want to be careful to avoid

false positives on rubbish inputs–i.e., we do not want to classify a degenerate input as being something real. In

the case of separate binary classifiers for each class, we want all classes output near zero probability of the class

being present, and in the case of a multinoulli distribution over only the positive classes, we would prefer that

the classifier output a high-entropy (nearly uniform) distribution over the classes. The traditional approach to

reducing vulnerability to rubbish inputs is to introduce an extra, constant output to the model representing the

rubbish class (?). Nguyen et al. (2014) recently re-popularized the concept of the rubbish class in the context of

computer vision under the name fooling images. As with adversarial examples, there has been a misconception

that rubbish class false positives are hard to find, and that they are primarily a problem faced by deep networks.

Our explanation of adversarial examples as the result of linearity and high dimensional spaces also applies

to analyzing the behavior of the model on rubbish class examples. Linear models produce more extreme

predictions at points that are far from the training data than at points that are near the training data. In order to

find high confidence rubbish false positives for such a model, we need only generate a point that is far from the

data, with larger norms yielding more confidence. RBF networks, which are not able to confidently predict the

presence of any class far from the training data, are not fooled by this phenomenon.

We generated 10,000 samples from and fed them into various classifiers on the MNIST dataset. In

this context, we consider assigning a probability greater than 0.5 to any class to be an error. A naively trained

maxout network with a softmax layer on top had an error rate of 98.35% on Gaussian rubbish examples with

an average confidence of 92.8% on mistakes. Changing the top layer to independent sigmoids dropped the

error rate to 68% with an average confidence on mistakes of 87.9%. On CIFAR-10, using 1,000 samples from

, a convolutional maxout net obtains an error rate of 93.4%, with an average confidence of 84.4%.

Figure 5: Randomly generated fooling images for a convolutional network trained on CIFAR-10. These examples were generated by drawing a sample from an isotropic Gaussian, then taking a gradient sign step in the direction that increases the probability of the “airplane” class. Yellow boxes indicate samples that successfully fool the model into believing an airplane is present with at least 50% confidence. “Airplane” is the hardest class to construct fooling images for on CIFAR-10, so this figure represents the worst case in terms of success rate.

These experiments suggest that the optimization algorithms employed by Nguyen et al. (2014) are overkill

(or perhaps only needed on ImageNet), and that the rich geometric structure in their fooling images are due to

the priors encoded in their search procedures, rather than those structures being uniquely able to cause false

positives.

Though Nguyen et al. (2014) focused their attention on deep networks, shallow linear models have the same

problem. A softmax regression model has an error rate of 59.8% on the rubbish examples, with an average

confidence on mistakes of 70.8%. If we use instead an RBF network, which does not behave like a linear

function, we find an error rate of 0%. Note that when the error rate is zero the average confidence on a mistake

is undefined.

Nguyen et al. (2014) focused on the problem of generating fooling images for a specific class, which is a harder

problem than simply finding points that the network confidently classifies as belonging to any one class despite

being defective. The above methods on MNIST and CIFAR-10 tend to have a very skewed distribution over

classes. On MNIST, 45.3% of a naively trained maxout network’s false positives were classified as 5s, and

none were classified as 8s. Likewise, on CIFAR-10, 49.7% of the convolutional network’s false positives were

classified as frogs, and none were classified as airplanes, automobiles, horses, ships, or trucks.

To solve the problem introduced by Nguyen et al. (2014) of generating a fooling image for a particular class,

we propose adding to a Gaussian sample x as a fast method of generating a fooling image

classified as class i. If we repeat this sampling process until it succeeds, we a randomized algorithm with

variable runtime. On CIFAR-10, we found that one sampling step had a 100% success rate for frogs and trucks,

and the hardest class was airplanes, with a success rate of 24.7% per sampling step. Averaged over all ten

classes, the method has an average per-step success rate of 75.3%. We can thus generate any desired class

with a handful of samples and no special priors, rather than tens of thousands of generations of evolution. To

confirm that the resulting examples are indeed fooling images, and not images of real classes rendered by the

gradient sign method, see Fig. 5. The success rate of this method in terms of generating members of class i may

degrade for datasets with more classes, since the risk of inadvertently increasing the activation of a different

class j increases in that case. We found that we were able to train a maxout network to have a zero percent

error rate on Gaussian rubbish examples (it was still vulnerable to rubbish examples generated by applying a

fast gradient sign step to a Gaussian sample) with no negative impact on its ability to classify clean examples.

Unfortunately, unlike training on adversarial examples, this did not result in any significant reduction of the

model’s test set error rate.

In conclusion, it appears that a randomly selected input to deep or shallow models built from linear parts is

overwhelmingly likely to be processed incorrectly, and that these models only behave reasonably on a very thin

manifold encompassing the training data.

Designed for Accessibility and to further Open Science